广西市凯发手机版官网机电设备有限公司

服务热线:

0769-83932121

Banner
行业知识

凯发手机版官网和灌胶机的异同点分析

随着各行各业的发展,凯发手机版官网灌胶机已经广泛使用到到通讯电子、LED照明、白色家电、汽车电子等领域,但是还有一些客户对凯发手机版官网和灌胶机不知道怎么去区别,今天凯发手机版官网厂家就来和大家聊一聊凯发手机版官网和灌胶机的异同点。

With the development of all walks of life, the glue machine has been widely used in communications electronics, LED lighting, white household appliances, automotive electronics and other fields, but some customers do not know how to distinguish between the glue dispenser and the glue machine. Today, the dispenser manufacturers come to talk about the similarities and differences between the glue dispenser and the glue machine.

1、胶量和胶水的使用不同,灌胶机一般是使用大胶量去灌胶,而凯发手机版官网是使用小胶量或是微量去点胶,胶水分为单组份胶水和双组份胶水,而使用单组份胶水的为凯发手机版官网的较多,使用双组份胶水的一般是是灌胶机。

The use of glue and glue is different. The glue machine is usually used to remove glue with large amount of glue, and the glue dispenser is a small amount of glue or a trace of glue. The glue is divided into single component glue and double component glue, while the single component glue is used more for the glue dispenser.

2、供胶系统和使用性质不同,凯发手机版官网通常是采用板卡气压控制胶水,灌胶机则根据胶水填充料情况,选用齿轮泵、螺杆泵、活塞泵等泵体将两种胶水定量、配比、混合后再灌到产品。凯发手机版官网适用于产品点、涂、画圆、走各种异形轨迹等,而灌胶机适用于产品密封灌胶,防水灌胶通常以定点为主。

The glue supply system and its use are different. The glue dispenser usually uses the plate pressure to control the glue. The filling machine is based on the rubber filling material, and the two kinds of glue, such as the gear pump, the screw pump and the piston pump, are selected, and the two kinds of glue are quantified, mixed, and then mixed to the product. Dispensing machine is suitable for product point, coating, round and various irregular tracks, etc. the glue filling machine is suitable for sealing products and glue filling.

3、应用领域不同,凯发手机版官网通常用于小型产品点胶,如手机外壳、手机按键、对讲机、扬声器、音响、PCB、电子元件等产品点涂胶,灌胶机通常用于LED电源,防水电源,驱动电源,电容,变压器,点火线圈、滤清器、洗墙灯、LED软灯条、线灯条等各类产品密封,防水,防潮灌封。

The application field is different, the glue dispenser is usually used for small product glue, such as mobile phone shell, mobile phone keys, interphone, loudspeaker, audio, PCB, electronic components and other product points. The gumming machine is usually used for LED power, waterproof power, driving power, capacitance, transformer, ignition coil, filter, wall lamp, LED All kinds of products, such as soft strip, line lamp and so on, are sealed, waterproof, moistureproof and sealed.